Sol-Ark 12K Hybrid Inverter/Charger Pre-Wired System

This is the outdoor-rated version of the Sol-Ark 12K Hybrid Inverter System. It incorporates a battery-based inverter, charge controller, display with remote monitoring, auto generator start, load center with breakers, rapid shutdown, and WiFi connectivity all into one pre-wired system enclosed in a single housing - but with this version, the housing is rated for outdoor installation.

The Sol-Ark 12K Hybrid Inverter System has it all and does it more efficiently than the competition.

Being pre-wired with so many system components already integrated, Sol-Ark's 12K hybrid inverter makes a great choice (and an easy installation) for off-grid, grid-tie, or battery backup solar installations. Up to eight of the 12K systems can be stacked in parallel.

In addition to the easy installation of the single pre-wired housing, Sol-Ark has also excelled in the area of PV-to-AC efficiency, boasting a CEC-weighted efficiency of 96% (peak performance up to 97%) - meaning a smaller solar array can be used to get the same amount of power as systems with other inverters.

FEATURES:

• Grid-Interactive or Off-Grid capability in the same package - can be used with or without energy storage - add batteries down the line  (The unit can be used in grid-tied applications without batteries, but if there is an outage, and there are no batteries, the inverter shuts down per NEC).
• Easy and fast to install - no external components (ie. fuses, breakers, combiner box) - all integrated in one unit
• Indoor/Outdoor installations
• Lightweight - under 80 lbs
• Color touch screen
• Works with the widest variety of 48V battery chemistries - from lead acid to lithium
• Backup power (even use the Grid as backup!) and support for time-of-use optimization
• Completely pre-wired system - inverter and charge controller included
• Wifi integrated for easy monitoring of system performance
• Integrated DC Disconnect, Auto Gen Start, Critical Loads panel
• Highly efficient - both on-grid and off-grid
• Generator support
• Field-upgradeable software with remote support
• Fully NEC compliant (N. America) with rapid shutdown
• UL1741SA/Rule 21 and 14H Compliant (Grid Sell Only)

APPLICATIONS:

• Grid-Tied Mode - Sell power back to the Utility to reduce your electric bill*
• Meter Zero Mode - Zero your electric bill without adding an additional smart meter
• Time-Of-Use Mode - Use solar and batteries to minimize grid power usage when it's most expensive
• Smart Load Mode - Use a programmable output for high-power off grid loads or grid Time-of-use loads - to run only when there is optimum solar - use excess PV power when batteries are full
• Off Grid applications - battery agnostic
• AC Coupling - retrofits to existing grid tie systems
• Battery backup applications