Home / Shop / Pumps / Surface Pumps

Flowlight Booster Pump Low Flow, 24 Volt, Model 2910

$1,578.00
Flowlight Booster Pump Low Flow, 24 Volt, Model 2910
Flowlight Booster Pump Low Flow, 24 Volt, Model 2910
Flowlight Booster Pump Low Flow, 24 Volt, Model 2910
Flowlight Booster Pump Low Flow, 24 Volt, Model 2910
Flowlight Booster Pump Low Flow, 24 Volt, Model 2910
Flowlight Booster Pump Low Flow, 24 Volt, Model 2910
Flowlight Booster Pump Low Flow, 24 Volt, Model 2910
Flowlight Booster Pump Low Flow, 24 Volt, Model 2910

Home / Shop / Pumps / Surface Pumps

Flowlight Booster Pump Low Flow, 24 Volt, Model 2910

$1,578.00
Model Number: 75-566
Maximum quantity exceeded
Minimum purchase amount of 0 is required
Maximum purchase amount of 0 is allowed
Your Price: $1,578.00
1578.000
A one-time price of $1,578.00 will be added to your order.
Categories: Surface Pumps
Manufacturer: Dankoff Solar
Facebook
X
Email
LinkedIn
  • Description
  • Specifications

Flowlight Low Speed Booster Pump - Model 2910 - 12V, 24V or 48V

This rotary vane pressure pump uses one third to one half the energy of conventional AC pressure pumps and eliminates the high starting surges which push inverters to their limit.  The Low Speed Flowlight Model 2910 is available in 12, 24, or 48 volts DC.  Designed for use with battery banks; NOT solar direct.  These 16.5" pumps are more powerful, quieter, and much more durable than the less expensive Shurflo diaphragm pumps.  Wearing parts are replaceable, and typically last 5 to 10 years.  Overall life expectancy is 15 to 20 years.  The Flowlight pumps are the BEST choice for pressurizing a full time off-grid residence.  A large pressure tank(40 gallons minimum), locally available, must be used.  We would also advise that this pump be installed in an outdoor pump house with your pressure tank, as the rotary vane action of the pump may be too noisy for some in home applications.

Pump will deliver up to 2.7 gpm at 65 psi using 180 watts, to a maximum of 3.4 gpm at 30 psi using 120 watts.

The EZFLOW Installation Kit and Inline Filter Kit are considered essential equipment and will make this pump simple for anyone to install and service. The Installation kit includes a pressure switch, pressure gauge, check valve, drain valve, T fitting, shut-off valve and pipe nipples.

The Dry Run Switch prevents damage should your water source run dry. Essential protection if water shortage is a possibility as this pump will be ruined if it runs dry.  Do not allow this pump to run dry! Switch may be added at anytime.

16.5" x 5"

One year warranty.

Specifications:

  • 24 Volts DC
  • Rotary vane pump mechanism (pulsation-free)
  • Solid forged brass pump body with carbon-graphite and stainless steel working parts
  • NSF approved for drinking water
  • Handles sea water and dissolved minerals
  • Survives most freezes
  • Permanent magnet, ball bearing DC motor, thermally protected
  • Clear flexible hoses and pressure relief valve included
  • Cannot tolerate dirt; water must be filtered clear
  • Pump can be mounted horizontally or vertically
  • Length: 16.5 inches (42 cm)
  • Weight: 18 pounds (8.16 kg)
Pressure PSI30405065
Total Depth of Head In Feet7095119150
Flow Rate GPM (lpm)3.4 (13)3.3 (12)3.1 (12)2.7 (10)
Watt-hours per Gallon Pumped0.60.670.751.1
Amps Draw at 12 Volts10111215
Amps Draw at 24 Volts55.567.5

1 year Warranty